Wall hung washing lines

Wall hung washing lines are a fantastic idea! It not only saves on space, but it is also only visible when you want it to be. Wall hung washing lines are sturdy and can hold plenty of laundry.

When choosing a wall hung washing line it is important that you make sure that the size of the wall hung washing line is correct. Although a big difference from the rotary washing line the wall hung washing lines are great for people with limited space. Even though it’s small in size the rotary shaped lines means that you can still get a good few metres (around 24 metres) of drying space, which is enough for big load of laundry, so it’s a good option as a substitute to a single washing line if you have limited space or a small garden.

Mounting the wall hung washing line unit is easy when you follow the instructions. The instructions to hang the wall hung washing line often have tips on how to drill the holes into the wall and a special tool which is easy to use.  Wall hung washing lines are easy to work and can be opened by hand. It is also easy to collapse and fold neatly away. Wall hung washing line units also comes with covers, which keeps it dry, tidy and clean.

The lines on the outside are longer than the inside lines in length. It is wide enough for sheets but double sheets and bed covers needs to be folded or put over a corner. The space between the lines allows for good circulation of air between clothes. Washing nearer the wall will take longer to dry but with the line being mounted outside it wouldn’t take too much time.

Its a good, robust design and provides enough drying space for a full load. If you’re struggling for outside space for drying clothes then the wall hung washing line comes highly recommended.

article source : http://www.ecowashinglines.com/wall-hung-washing-line

 

Budget-Friendly Basement Renovation Ideas

For a lot of people, the basement serves as the landing zone for those things we don’t know what to do with. Many homeowners have dreams of a basement as an extra living space. A place where they can enjoy family time or relax with friends. However, most scoff at the idea of basement renovation that costs thousands of dollars.

Fortunately, creating a basement that’s both attractive and functional doesn’t have to be complicated or costly at all. Here are some awesome, budget-friendly ideas to jump-start your basement renovation project.

Create A Space For Everyone

If your basement is one large open space that doesn’t really suit everyone’s needs, you can create beautiful (and simple) room dividers with wooden pallets. Stand them on end and attach the two pallets to make a cornered wall.

Hang the kid’s artwork, family photos, or even paintings on the outside slats for added elegance and decor. Your room dividers can be used to create an instant office space or a place to hide the playroom toys when not in use.

If wooden pallets won’t work for your space, use some adorable bedsheets. Simply hang them from cables or curtain rods to create a partition and achieve the same look. The possibilities are endless…

Penny For Your Thoughts

Everyone’s heard the saying “penny for your thoughts”. How about creating a dramatic and unique flooring solution with pennies? The wow factor is off the charts and it won’t break the bank.

All you need is enough pennies (or bottle caps) to cover the floor. Also get some glue, grout, and several coats of sealant. Once you have your surface completely clean and prepped, start gluing the pennies in place. Once done, apply grout to fill in the spaces between the coins. Then finish with several coats of quality sealer for an awesome glossy finish. The biggest investment here is time.

Fabulous Floors

Bored of the drab concrete floor in your basement? Consider your concrete floor as a blank canvas that’s ready for your personal touch. The possibilities are simply endless here.

You can choose to paint the entire floor a solid color or get a bit more creative and add a stencil to dress it up. You can use the stencil to cover the entire floor or keep it simplistic with something like a wandering vine stencil around the perimeter of your concrete floor.

Ditch The Boring Block Walls

Choose several shades from the same color palette and get creative! You can use the different shades to paint each block and even mimic limestone and brick with this technique.

For a more industrial look, you can choose inexpensive corrugated metal paneling and attach them to the walls for added light and reflection with a unique twist. For a more flexible and interchangeable look, add some quality draperies or gorgeous textiles to cover the block walls.

Look Up For Inspiration

Basements are notorious for exposed ceilings and pipes along with insufficient lighting.

If you like the exposed beams but need more lighting, consider adding strings of garden lights for a whimsical airy feel. These can be hung in a symmetrical layout or crisscrossed across the room for a more laid-back comfy feel.

You can also create a loft-like feel to your space by painting the ceiling and rafters with an accent color, or even black! This project will require more time than anything, but the results are well worth the effort.

If you would rather hide the pipes, textiles can offer some amazing options. Depending on the height of your ceiling, you can drape gorgeous fabrics from the rafters with heavy duty staples or tacks, and create a whole new feel to your space.

Luxurious Leather Bathroom Renovation

Get an upscale look by recycling leather belts. This project can be scaled to make a well-placed rug in any size you need or even cover an entire floor! For your rug, cut a durable piece of fabric and trim the belts to fit the rug. Use glue to attach and…. instant wow factor!

Invest in Solar but Find Out if the Price is Right

After all, most home solar systems come with a pretty big price tag. You want to be sure that it’s an investment that will pay off, not just for the environment, but also for your wallet.

Figuring out whether solar panels will save you money in the long run (i.e. over the 25 year average lifespan of the panels) comes down to location, location, location. It’s not just about how much solar energy you can produce (but this is of course an important factor!), but it’s also about how much you pay for retail electricity from your local utility and which financial incentives are available where you live. The term that is often used is grid parity, and it refers to the point at which the price of solar electricity is the same or cheaper than electricity from your utility. Also solar panel installer quotes need to be considered as qualified installers are always recommended.

It’s not too difficult to figure out what you pay for electricity; the most accurate way is to look at your utility bills and take the total you paid for a year of electricity and divide that by the total number of kilowatt-hours (kWh) that you consumed (most bills summarize your annual consumption, but you may need to dig out your bills for the past 12 months). Now you have a number for what you pay for electricity. For comparison, the average utility rate in the United States from May 2015 to May 2016 was 12.64 cents/kWh. Depending on where you live, you may be paying more or less.

The next step is to figure out how much the electricity from solar panels will cost. This is a little more complicated as you need to determine how much electricity you can generate in a year, multiply that by 25 years on average, and divide that by the cost of the panels (including the cost of financing them, if you need a loan for example). We call this the “levelized cost” of solar electricity. There are a number of calculators out there that can help you with this, including our calculator Sunmetrix Discover.

Let’s take an example of a homeowner purchasing a 5 kW solar system (an average-sized system), for a home in Chicago, Illinois. Luckily, this homeowner has a south-facing roof with no, or minimal, shading, so she can produce on average about 6,530 kWh/year. This translates into 163,250 kWh over 25 years. (We always recommend that a solar professional visit your home to assess your roof and shading levels to determine the potential for solar panels, as each situation is unique.)

If we assume the solar panels cost $4 per watt (which is about the average cost in the U.S., although the price varies from place to place), then the system would cost about $20,000, minus the 30% federal tax credit of $6,000, or $14,000. To be conservative, it’s good to assume some costs for operation and maintenance over the lifetime of the panels; let’s assume about 10 percent of the purchasing cost before tax credits (0.10 * 20,000), or in this case, about $2,000 for a 5 kW system.

For simplicity, we will assume that the panels are being paid for outright, but if that’s not the case, you would want to include the cost of financing the panels (which you can do using our Buy or Lease Calculator). Moreover, each state and municipality is different when it comes to financial incentives for solar energy; for simplicity, we only included the federal tax credit of 30%. All in all, we are assuming a total cost of $16,000.

To determine the levelized cost of solar electricity, we divide $16,000 by 163,250 kWh (the amount of electricity we can produce over 25 years) and we get about $0.10/kWh or 10 cents/kWh. Since in Illinois, the average cost of retail electricity from the utility was about 12.6 cents/kWh (from May 2015 – May 2016), we can see that over the lifetime of the panels, this homeowner would save money by switching to solar energy. If the utility rate is different where you live, the results may be somewhat different.

It’s important to add one final word about recent changes in regulatory policies in certain states which greatly impact the profitability of solar energy. Where in some states the utility compensates homeowners who produce excess electricity at the retail rate (what you pay when you buy it), there has been a move towards only compensating solar producers for their excess electricity at the wholesale rate (which is much less than what you have to pay when you buy it). This is relevant if you are producing more solar electricity during the day and are not using it at that time (because you’re at work for example), and then consuming more electricity from the utility in the evening during peak periods when electricity may be more expensive.

It’s important to speak with solar professionals who will help you design your home solar system so that it meets your particular needs, and to speak with customer service at your utility so that you know what to expect when it comes to earning credits for your excess electricity, and what you have to pay when you need to make up the difference by purchasing extra electricity from your utility.

In conclusion, the cost of solar energy has fallen considerably over the past decade, and electricity prices continue to rise in most places, so it only makes sense that more and more homeowners are considering solar panels for their homes. It pays to do your homework with some preliminary research online and by speaking with solar panel professionals in your area, so that you can be sure that your solar panels are an investment that will pay off in the long run.

 

written by: 

article source http://www.brighthub.com/environment/green-living/articles/129347.aspx

Fair Condensing Boiler Price Quotes

Knowing that the best would be having no energy spending costs, ideally energy consumption in our homes should come from renewable energies, that would be a plus to our personal finances, as well as our planet.

Nonetheless, because either our home does not allow such systems, because they are too expensive, because their energy production is not enough or any other valid reason, there is still a big demand of gas fueled equipment to heat the water or to warm our home.

Given this is a certainty, then there is little we can do, but choose wisely, among what the market has to offer, considering which kind of equipment is best for our needs and for our savings, as well as our planet.

So why are condensing boilers so efficient? When natural gas is burned, there are three major products of combustion; heat, water vapor and carbon dioxide (other byproducts are present, mainly pollutants in trace amounts, but for this discussion only heat, water vapor and carbon dioxide will be considered). In a non-condensing boiler, a significant amount of heat is lost thru the flue. Typically 12-25% depending on the type and age of the boiler; and the conditions that it’s operating at. A condensing boiler, operating at ideal conditions, can limit those losses to as little as 2-3%. This is accomplished by “condensing” the water vapor in the flue gasses and reclaiming the latent heat of vaporization. Without getting too detailed about how this is done, the hot flue gas is used to pre-heat the cool return water. The cooler the return water, the more condensation is formed on the heat exchanger and the more latent heat is recovered. As you can see in the chart to the right, the efficiency varies quite a bit with the return water temperature. In fact, the warmest the return water can be and still condense the flue gas is about 125 degrees F. Above that, the boiler operates as a traditional non-condensing boiler with correspondingly traditional efficiency. Find boiler quotes and other factual information at quoteaboiler.

Replacing your boiler no longer needs to be a pain. Quoteaboiler gives you the factual information you require about the different boiler replacement quotes, prices, brands and service coverage areas available in the market place in 2016. We have compiled a detailed boiler replacement guide, so please use this information to pick the home heating solution that is suitable and affordable to your individual household needs.

 

Written By Matt Freitas

 

Paint Your Home’s Interior Like a Pro

Painting is one of the simplest and most popular DIY projects. This doesn’t mean that everyone who tries their hand on it gets it right. First timers, and even self-taught veterans, can get a couple of things wrong along the way. By getting the entire process right will improve on the paint job’s aesthetic appeal, so you have to get it right first time. Here is how to paint your home’s interior like a pro without going to a painting school.

Have a Plan

There’s more to painting that just applying paint to a surface. There’s the preparation process, the priming, checking local interior painting prices and top coating and finishing up. Understanding what each process does and doing it right is the key to exemplary paint job. The complete painting cycle includes:

  • choosing your paint
  • preparing the surface
  • priming the surface
  • applying the paint
  • painting clean up

Choose the Right Paint

Your paint choice is all about the color and paint type. Colors are easy to choose as almost anyone can choose a pleasant color.

Paint types and gloss finishes are a more complex matter. Glossy paints might look great but will accentuate any blemishes on the walls. Oil paints will give you a hard waterproof surface as opposed to traditional latex.

Latex resists mildew and yellowing better. It won’t give those sickening new paint fumes and you can opt for a latex-enamel blend to get that hard finish.

Prepare the Surfaces

Paint doesn’t cover wall blemishes. It is up to you handle them before you begin painting. You have to scrape, sand, patch and fill every dent, crack, protrusion or imperfection before grabbing your paintbrushes. It might not be the most pleasant part of painting but it is the most important.

Proper preparation saves you the pain of trying to use multiple paint cots to hide blemishes and tiny cracks on the walls.

Don’t forget to finish up the surface preparation by applying some protection to surfaces you don’t want paint on. This could be cabinet knobs, light switches, doorframes and most importantly the floor. Cover them with painters tape or drop cloths. It would be wise to remove the knobs, handles and light switches whenever possible.

Use Primer

Priming is especially important when working on new surfaces or painting over a dark color. Anything close to white can be painted over without the primer coat but it is always wise to prime. The primer will:

  1. block paint stains from bleeding through
  2. allow one-coat coverage
  3. improve on paint adhesion hence reducing blisters and paint peeling

Some manufacturers will sell you paints with a primer to cut the chase short. This might work on clean surfaces but it will never be as good as a dedicated primer. A pro trick is to tint the primer with your finish color. Add in a small amount of your top coat paint to give the primer the right tint. This will enhance the aesthetics you get when you finally apply your topcoat.

Doing the Actual Painting

You will have to apply the paint in a top down fashion. While paintbrushes are the traditional way to apply paint, rollers are more efficient and easier to work with. The paintbrush requires supple wrist strokes that might take time to perfect. You will tire more when using the brush as opposed to a roller.

Moreover, you can put the roller on an extension pole and reach out to higher surfaces without using a stepladder.

This, however, doesn’t mean you won’t be in need of brushes. An assortment of different sized paintbrushes will come in handy when reaching into the nooks and crannies the roller can’t go into.

If you are applying more than one coat of paint, remember to give each coat the required time it needs to dry up. If you have to stretch into the next day, cover your brushes and rollers in polythene to prevent caking up.

Don’t forget to clean up the painted surface. Let the last coat set before buffing it up with a piece of cloth to get rid of smudges and spills. This will give your wall that smooth even look that would put a smile on anyone with a sweet tooth for beauty.